Table of Contents
Advertisement
Network pack setup
With the Network Pack, GY-DV5000/KA-DV5000 can be controlled via LAN.
It is also possible to playback video and audio from KA-DV5000 on your PC in the STREAMCAPTURE screen in realtime (live display)
as well as save data to files. However, note that video and audio from KA-DV5000 can be played back only on one PC at a time.
Peer-to-peer connection that directly connects the unit with a PC is explained here.
● There are the 3 types of users for Web access:
● Users referred as "jvc" (can be changed) that can
perform all operations, "ENCODE" users that can
view all data but only change the encoding
settings, and "BROWSE" users that can only view
data.
● The default password for each user type is "ka-
dv5k" for "jvc" users, first 4 characters of the
password set for "jvc" users for "ENCODE" users
(default is "ka-d") and fixed password of "ka-dv"
for "BROWSER" users.
● The following is an explanation when login is made
a user permitted with all operations. In the case of
other users, the OK button and Cancel button will
be disabled even if operations on the screen are
allowed.
1.
Turn your PC and GY-DV5000 and KA-DV5000 power off.
2.
Insert the PCMCIA LAN card to specify into KA-DV5000.
3.
Connect the unit and PC using a 10/100 BASE-T cross cable.
4.
Turn the PC and GY-DV5000 and KA-DV5000 power on.
5.
Insert a recordable DV cassette tape.
6.
PC settings
● Set the LAN card driver according to the manual provided
by the card manufacturer.
● Network settings ( page 14)
q Set the following items in the TCP IP properties:
* DHCP server is not used.
IP address: 192.168.100.101
Subnet mask: 255.255.255.000
w Setting the proxy server.
• Set the proxy server using the "LAN SETTINGS" of
Windows.
• When using peer-to-peer communication that directly
connects the PC and KA-DV5000, deselect the "Use a
proxy server" checkbox.
• When the "Use a proxy server" setting must be en-
abled due to a LAN environment (in-company LAN,
etc.), click "Advanced..." and input the IP address of
GY-DV5000 in "Exceptions" of the "Use a proxy server"
setting.
( "About proxy servers," Page 49)
7.
Launch the browser on your PC and enter 192.168.100.101
(default factory setting) in the address bar and press ENTER.
● A confirmation window for user ID and password appears.
Enter Network Password
Please enter tour authentication information.
secured
Resource
User name:
Password:
Save password?
Controlling GY-DV5000/KA-DV5000 via LAN card
GY-DV5000
OPEN
EDITSEARCH
MONITOR
FILTER
1
3200K
2
5600K
1 8
/
ND
.3
5600K
.4
5600K
1 64
/ ND
POWER
SUPPLY
SHUTTER
STATUS
LCD BRIGHT
DISPLAY
ON OFF
MENU
AUDIO
LEVEL
OPEN
PULL
FRONT
AUTO IRIS
FULL AUTO
BLACK
LOLUX
REAR
CH-1
CH-2
CH-1
CH-2
MODE
AUDIO INPUT
BACK L
STRETCH
VTR
AUDIO SELECT
NORMAL
NORMAL
CH-1
CH-2
SPOT L
COMPRESS
CAM
MANUAL
AUTO
NETWORK
PACK
KA-DV5000
POWER
VTR
ON
OFF
KA-DV5000
8.
Input the user ID and password.
q For the user ID, input "jvc" (factory setting).
For the password, input "ka-dv5k" (factory setting) or the
name set in the SERVER SETUP menu screen.
( page 12)
w Check to make sure the inputted user ID and password
are correct and click the OK icon.
(Check "Save password" so that the password does not
need to be inputted for future accesses.)
9.
If the user ID and password are correct, the NETWORK PACK
SETUP screen appears on the PC monitor.
● GY-DV5000/KA-DV5000 settings and operations can be
controlled using the NETWORK PACK SETUP. ( page
32)
Caution
● When setting the NETWORK PACK SETUP screen (CAM &
VTR CONTROL, NETWORK SETUP, PORT SETUP or EN-
CODE PARAMETERS) and the same menu screen is dis-
played on the LCD screen or viewfinder of GY-DV5000, val-
ues set in the NETWORK PACK SETUP screen will not ap-
pear on menu screen of the LCD screen or the viewfinder of
GY-DV5000.
The values set in the NETWORK PACK SETUP screen will
appear after the menu screen of GY-DV5000 is closed once
and reopened.
● During camera/VTR control, noise may be heard from the
speakers. However, this is not a malfunction. If the noise be-
comes irritating, open the "Sound & Multimedia" property from
the Windows Control Panel and set the sound of "Windows
Explorer Start Navigation" of "Sound Events" to off.
* For setting details, see Windows' Help.
● Check to make sure that NET REMOTE in the OTHERS [1/2]
?
X
menu screen of GY-DV5000 is set to "ON". Camera control
OK
will not be available when NET REMOTE is set to "OFF".
● Depending on the cache setting of your browser, the param-
Cancel
eters updated in the Camera menu may not be effective im-
mediately.
31
10/100 BASE-T
PC
cross cable
Socket Com: EA2900-117 (USA)
EA2903-162 (Europe)
EA2906-194 (Asia)
(CF memory card adapter (PCMCIA TYPE I/II
specifications)(sold separately) is required for
inserting this card.)
Set the LAN card
driver by following
the instructions on
manual provided
by the card
manufacturer.
Advertisement
Table of Contents
