Table of Contents
Advertisement
Introduction
Lock release button
Cover
Section A
Caution
●
Make sure the power of GY-DV5000 is off when inserting/
removing a CF memory card/LAN card. Inserting/removing
a card with the unit power on may damage the data storage
section of the CF memory card or the card itself.
●
Do not use the wireless LAN card continuously for more
than 48 hours.
Inserting card
1.
Turn off the GY-DV5000 power.
2.
Press and hold the lock release button and open the cover.
3.
Insert a card into the KA-DV5000 card slot. Then, close the cover.
● The cover may not close depending on the wired LAN card or the card shape. In this case, remove the cover by pressing section
A and pulling on the cover.
4.
Turn on the GY-DV5000 power.
5.
Turn on the KA-DV5000 power.
LCD screen
Removing card
1.
Turn off the GY-DV5000 power, or turn off the KA-DV5000 power.
2.
Open the cover, press the EJECT button of KA-DV5000 and remove the card.
CF memory card or
LAN card
Card slot
EJECT button
KA-DV5000
C F
Card status display
: No card
e
: LAN card
C F
: CF memory card
Inserting/removing CF memory card/LAN card
● The KA-DV5000 accepts the following cards for which operation has
been confirmed: (As of August 2002)
Operating voltage
Current consumption
• Wired LAN-card
US:
EA2900-117 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
Asia:
EA2906-194 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
* Revision indicated on the upper right of package production label.
• Wireless LAN-card
TEW-201PC
TEW-202CF
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
TRENDware)
WCF11 (Name of manufacturer: LINKSYS)
AIR-PCM350
(Name of manufacture: Cisco Systems)
FCCID: LDK102040
• CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter
*2: Use PCMCIA card TYPE 2 adapter
For the latest operational check card, visit the website below
or contact your JVC dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/
● Card status according to the inserted card type is displayed on
the LCD screen/viewfinder screen. ( page 4)
(The viewfinder will show the status in black and white.)
Memo
When turning the power on, the card status
display shown on left will flash during initial-
ization.
3
3.3 V
Max. 500 mA
*1
*1
*1
*2
*1
Advertisement
Table of Contents
