Tableau TD2u User Manual page 58

58
Non-
Volatile Information
Memory Stored
TD2u con-
figuration
Flash #2 TD2u con-
figuration
TD2u logs
Real-Time
Date/Time
Clock
The Factory Reset
each item. It is not possible to recover settings or log entries after the flash memory has been
physically erased.
User or Case-Spe-
cific Info
User-specific
Case-specific (if case
ID/notes are enabled)
User-specific and
Case-specific
None
and Erase Logs options physically erase the flash memory corresponding to
Tableau TD2u User Guide Version 1.3.0
Ability to Reset/Clear
All configuration settings can be
erased and restored to factory
defaults by selecting Setup
Reset. Configuration settings (exclud-
ing user name and startup mode)
can be reset to defaults using
> Imaging Options > Restore
Options.
All configuration settings can be
erased and restored to factory
defaults by selecting Setup
Reset. Alternately, the Case ID/Notes
can be disabled through
Case Info Options.
All logs can be erased by either select-
ing Logs > Erase Logs or
ory Reset. Alternately, logs can be
erased individually. When viewing a
specific log entry, select the
[Options] soft key, then select
Log.
The Date/Time cannot be restored to
a factory default state. However,
after performing a Factory
TD2u prompts you to change the
Date/Time within the Setup Wizard.
The Date/Time can also be changed
by selecting Setup > Date and
> Factory
Setup
> Factory
Setup >
Setup > Fact-
Erase
Reset, the
Time.