Appendix 2 Error Messages - YOKOGAWA DLM4038 User Manual

Dlm4000 series, mixed signal oscilloscope communication interface
Hide thumbs Also See for DLM4038:
Table of Contents

Advertisement

Code
Message
151
Invalid string data.
158
String data not allowed.
161
Invalid block data.
168
Block data not allowed.
171
Missing Right.
172
Invalid expression.
178
Expression data not allowed.
181
Invalid outside macro definition.
Communication Execution Errors (200 to 299)
Code
Message
221
Setting conflict.
222
Data out of range.
223
Too much data.
224
Illegal parameter value.
225
OverFlow.
226
Out Of Memory.
241
Hardware missing.
260
Expression error.
270
Macro error.
272
Macro execution error.
273
Illegal macro label.
275
Macro definition too long.
276
Macro recursion error.
277
Macro redefinition not allowed.
278
Macro header not found.
IM DLM4038-17EN
Corrective Action
The parameter is either too long, or it contains an
unusable character.
Use a data type other than <String data>.
<Block data> cannot be used.
<Block data> cannot be used.
Mathematical operations cannot be used.
Mathematical operations cannot be used.
Mathematical operations cannot be used.
The DLM4000 does not support the IEEE488.2 macro
specifications.
Corrective Action
Check settings that are related to each other.
Check the ranges of the settings.
Check data byte lengths.
Check the ranges of the settings.
Keep program messages to 1024 bytes or less in
length, including <PMT>.
Keep program messages to 1024 bytes or less in
length, including <PMT>.
Check that the specified options are all installed.
Mathematical operations cannot be used.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.
The DLM4000 does not support the IEEE488.2 macro
specifications.

Appendix 2 Error Messages

Page
4-7 and
chapter 5
4-6 and
chapter 5
4-7 and
chapter 5
4-7 and
chapter 5
Chapter 5
Chapter 5
Page
Chapter 5
Chapter 5
Chapter 5
Chapter 5
4-2
4-2
App-3
1
2
3
4
5
6
App
Index

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents