Table of Contents
Advertisement
Remove the Port Splitter
To remove the port splitter from the DIN rail, place a screwdriver in the DIN rail
latch at the bottom of the port splitter. While holding the port splitter, pry
downward on the latch until the port splitter is released from the rail.
DIN Rail
To remove the 1747-DPS1 port splitter from the mounting surface, unscrew the
screws.
Interpret the Status Indicators
The port splitter has four status indicators.
Indicator
OK
Controller
Network
Prog/HMI
Additional Resources
You can view or download publications at
http://literature.rockwellautomation.com. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
State
Flashing green or red
Solid green or red
Flashing red
Flashing green
Flashing red
Flashing green
Flashing red
Flashing green
Description
Port splitter is turning on and auto-configuring.
Port splitter is on and operational.
Controller port is transmitting DF1 data.
Controller port is receiving DF1 data.
Network port is transmitting data.
Network port is receiving data.
Prog/HMI port is transmitting DF1 data.
Prog/HMI port is receiving DF1 data.
Publication 1747-IN516B-EN-P - October 2007
Port Splitters
21
Advertisement
Table of Contents
