Table of Contents
Advertisement
12
Port Splitters
Install the 1747-DPS1 Port Splitter with a Mounting Plate
1. Determine your spacing requirements.
2. Drill holes into your mounting surface (#36 drill recommended).
3. Align the port splitter to the mounting plate and snap the port splitter into
place.
Port Splitter
Mounting Plate
4. Fasten the mounting plate to your surface with four screws
(6-32 recommended).
Publication 1747-IN516B-EN-P - October 2007
96.8 mm
Mounting Plate
(3.81 in.)
50.6 mm
(1.99 in.)
86.9 mm
(3.42 in.)
39.3 mm
(1.55 in.)
Advertisement
Table of Contents
