Table of Contents
Advertisement
Mount the 1747-DPS2 Port Splitter to a DIN Rail
The 1747-DPS2 port splitter is installed by mounting to a DIN rail.
1. Determine your spacing requirements.
2. Mount the DIN rail to your mounting surface.
3. Pull the latch down and hook the top slot of the 1747-DPS2 splitter over the
DIN rail.
4. While pressing the port splitter against the rail, push the latch up to secure
the port splitter into place.
1747-DPS2
101 mm
Splitter
(3.98 in.)
DIN Rail
35 mm
(1.38 in.)
Latch
Publication 1747-IN516B-EN-P - October 2007
Port Splitters
15
Advertisement
Table of Contents
