Summary of Contents for Allen-Bradley ControlLogix 1756-CP3
Page 1
Packing Data Installation Instructions ControlLogix Programmer Cable (Catalog Number 1756-CP3) Contents Use this document to install the 1756-CP3 cable. This cable connects the Logix 5550 or SLC family controllers to your DTE device. Cable Wiring Diagram Controller Computer (90û Female 9–pin (Straight Female 9–pin D–shell Connector) D–shell Connector)
Page 2
ControlLogix Programmer Cable Install the Cable 1. Connect the right-angle connector end of the cable to your controller at the communications port. Communications Port 2. Connect the straight connector end of the cable to your DTE device. Publication 1756-5.46 – May 1997...
Page 3
ControlLogix Programmer Cable Publication 1756-5.46 – May 1997...
Page 4
ControlLogix Programmer Cable Worldwide representation. Allen-Bradley Headquarters, 1201 South Second Street, Milwaukee, WI 53204 USA, Tel: (1) 414 382-2000 Fax: (1) 414 382-4444 Publication 1756-5.46 – May 1997 PN 955129-39 Publication 1756-5.46 – May 1997 Copyright 1997 Allen-Bradley Company, Inc. Printed in USA...