Table of Contents
Advertisement
Lower Display :
°C Display
mode selected
at switch ON.
Selects °F
Display mode.
Notes:
Selects °C
Display mode.
1. If a pressure transducer is not connected to the instrument, then by default,
atmospheric pressure (101.3 kPa) is selected and displayed.
2. During a data hold cycle the measured dewpoint reading is held and therefore the
PPM(V), PPM(W), g/m
sample gas temperature and pressure parameters are not held.
3. If the upper display is indicating %RH, and the lower "UNIT SELECT" push button
is pressed, then PPM will be displayed, and the upper display reverts to dewpoint in
either °C or °F.
KAHN INSTRUMENTS, INC.
%RH Mode
P - PPM(V)
SF - PPM(W)
in SF
6
3
G1 - (g/m
)
G2 - (g/Kg)
Pr - (kPa)
F - (°F)
P - PPM(V)
SF - PPM(W)
in SF
6
3
G1 - (g/m
)
G2 - (g/Kg)
Pr - (kPa)
C - (°C)
3
, and g/kg parameters will also be temporarily held. The
Dewpoint only Mode
P - PPM(V)
SF - PPM(W)
or
in SF
G1 - (g/m
G2 - (g/Kg)
Pr - (kPa)
°C/°F Mode selected by
Upper "UNIT SELECT"
push button.
885 Wells Road, Wethersfield, CT 06109
Tel: 860-529-8643; Fax: 860-529-1895
Page 14
6
3
)
E-mail: info@kahn.com
www.kahn.com
Advertisement
Table of Contents
