Victoria Arduino Venus Bar Technical Manual page 19

This machine will have to be used only for the
purpose described in this manual.
The manufacturer can't
responsible for possible damage caused by
improper, wrong, or unreasonable uses.
WARNING
Before using the machine read carefully and
completely the instruction manual, safety
regulations and the machine tuning/ directions.
The use of any electrical device must comply
with fundamental regulations. In particular:
• do not touch the machine with wet hands or
feet;
• do not use the machine barefoot;
• do not use extensions in places used as a bath
or shower;
• do not pull the supply cable, to disconnect the
machine from the supplying net;
• do not leave the machine exposed to
atmospheric agents (rain, sun, etc);
• do not allow the machine to be used by
children or by non-authorised personnel that
be considered
haven't read and understood this manual.
The authorised technician has to, before
carrying out any maintenance operation, unplug
the socket after having switched off the
machine switch.
bis For the cleaning operations bring the
machine to energetic state "O", that is to say
"machine is switched off and socket
unplugged" and keep exclusively to what is
stated in the present manual.
In case
functioning of the machine, switch it off.
Any intervention
Contact exclusively professionally authorised
of breakdown or wrong
is strictly forbidden.
personnel.
The possible repair of the products will have
to be made by the manufacturer only or by an
authorised service using exclusively original
spare parts.
Non-compliance with the above stated can
compromise the safety of the machine.
When setting it up, the licensed electrician
will have to check an omni-polar switch is
provided by the actual safety regulations with
opening distance from the contacts the same or
bigger than 3 mm.
µ
To avoid dangerous overheating, we do
recommend you uncoil the supply cable to its full
length.
¸
The user mustn't replace the supply cable of
this machine. In case of damage, switch the
17