Operation - RIDGID MS1290LZ Operator's Manual

Laser System (continued)

Operation

DANGER: Laser radiation. Avoid
direct eye exposure.
When the saw is "ON" and the blade is in
its highest position, the laser system will
show up on your workpiece as a red col-
ored broken line. This red broken line will
assist you in lining up the cut mark on the
workpiece with the blade for accurate
cuts.
1. Position your workpiece on the saw.
Make sure the blade is at its highest
position.
2. Turn the saw "ON" and a broken red
line will appear on your workpiece.
3. Align this red line with the cut-off mark
on the workpiece.
4. Lower the sawblade and make the cut.
As the blade gets closer to the work-
piece the broken red line will become
solid. Do not move the workpiece.
5. Turn the saw "OFF" and allow the
blade to come to a complete stop
before raising.
Practice cuts will let you become familiar
with correctly lining the laser mark up with
the cut-off mark and blade.
40
Broken
Red Line