Net Guard - Motorola ic502 User Manual

Launching a Sprint Data Connection
To launch a Sprint data connection:
Press
the home page is displayed.)
Note: If Net Guard is enabled and displayed (see page 165), press
OK (right softkey) to continue and access the Web.
While connecting, the following appears on the screen:
Preparing PCS Vision services.
If you had a previous Sprint data connection, the last page
you visited is displayed when you start your browser. When
this occurs, you may not see the "Connecting..." message
when you start the session. Though the browser is open, you
are not currently in an active data session—that is, no data is
being sent or received. As soon as you navigate to another
page, the active session starts and you see the "Connecting..."
message.

Net Guard

When you first connect to the Web, Net Guard confirms that
you want to connect. This feature helps you avoid accidental
connections. You can disable the Net Guard in the future by
selecting Always Auto-Connect when the Net Guard is
displayed.
To change your Net Guard settings:
Press
When enabled, the Net Guard appears only once per session.
Note:
The Net Guard does not appear if the phone is merely re-
connecting due to a time-out.
165 Section 3B: Sprint Data Services
O
> Web. (Your Sprint data connection starts and
O
>Settings > PCS Vision > Net Guard.
On to activate the Net Guard.
Off to deactivate the Net Guard.