Restarting
Your Receiver
Operating
Range
Switching radio
frequencies
To view information
1.
Press the MENU button.
2.
Scroll to the System option and press the Right
3.
Scroll to the Information option and press the Right
For normal operation, you only need to set your Receiver to standby when you are
not using it. Press the Power button on your RF Remote to turn on your Receiver
or set it to standby.
However, if you need to restart your Receiver, you can do so from the System
menu.
To restart your Receiver from the System menu
1.
Press the MENU button.
2.
Scroll to the System option and press the Right
3.
Scroll to the Restart option and press the OK button.
You can also restart your Receiver by disconnecting your Receiver from the power
outlet and waiting for a few seconds before reconnecting it.
Your RF Remote communicates with your Receiver via radio frequency. This means
you can use your RF Remote even when you are not in the same room as your
Receiver.
The signal strength between your RF Remote and Receiver is indicated by an icon
on the top left corner of your RF Remote's LCD.
Receiver are within range, and
your Receiver.
At times, interference from external sources may affect the operating range of
your RF Remote. To solve this problem, you can switch radio frequency channels.
To switch radio frequencies
1.
Press and hold the MENU button.
button or OK button.
button or OK button.
indicates that the RF Remote and
indicates that the RF Remote is out of range from
button or OK button.
Using Your RF Remote 4-6
Need help?
Do you have a question about the Sound blaster wireless music and is the answer not in the manual?