Step 1: Install Software - Creative Sound blaster wireless music User Manual

Getting Started
Step 1: Install
Software
• Disable all firewall
software on your
wireless network
before installing the
software. For more
information, refer to
your firewall
software's
documentation.
• If your wireless
router or access
point can be
configured as a
DHCP server, enable
this feature. This
makes it easier to
add other devices to
your wireless
network.
• If you are setting up
multiple Receivers,
make sure you set
them up one at a
time.
DO NOT connect your Receiver to your computer until you have installed the
software.
1. Turn on your computer and make sure your wireless router or access point is
set up and working properly.
2. Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically. If
not, you need to enable the Windows auto-insert notification feature for your
CD-ROM/DVD-ROM drive. For more information, see "What do I do when the
installation does not start automatically after the Installation CD is inserted?"
on page B-1.
3. For Windows XP only: If the Hardware Installation error message appears,
click the Continue Anyway button. For more information about this
message, see "Why does a Hardware Installation error message appear on a
Windows XP operating system during installation?" on page B-2.
Getting Started 3-1