Summary of Contents for ANFIM BEST ON DEMAND ELECTRONIC
Page 1
A N F I M ® A N F I M Via B. Verro, 33/5 MILANO ITALY - 20141 02/8465054 02/8464401 . (+39) (+39) : info@anfim.it : www.anfim.it e-mail web site INSTRUCTIONS MANUAL Mod.: EST ON DEMAND ELECTRONIC COFFEE GRINDER DISPENSER...
Page 2
BEST - ON DEMAND BEST - ON DEMAND ELECTRONIC PANEL The drawing above has been edited by the A N F I M Technical Department. All rights reserved. No part of this publication may be reproduced or transmitted, in any form or by any means - microfilm, photocopying or otherwise - without written permission of A N F I M srl.
1. General instructions Read this instruction booklet carefully before using the coffee grinder. The installation of the coffee grinder must be done by qualified personnel. The manufacturer cannot be held responsible for changes made by the user to the appliance and for accidental damages arising from installations and / or utilizations different from those mentioned in this instruction manual.
Transport 2.1 Packaging The A N F I M coffee grinder with dosing mechanism is supplied in a special card-board package; each package contains: Coffee grinder with dosing mechanism, Instruction booklet, Evidence of conformity 2.2 Handling of the appliance The coffee grinder does not need any special tools to operate the device. It can be operated manually.
240 mm 240 mm Power: 250 W 250 W Noise level: < 70 dB(A) < 70 dB(A) Blades diameter: 54 mm ANFIM 54 mm ANFIM ® ® Weight: 7,5 Kg 7,7 Kg. 4. Installation of the appliance 4.1 Installation of the appliance The coffee grinder must be placed on a flat, solid and dry surface.
5. Using the appliance 5.1 Instructions for use A) Fill the hopper with fresh coffee beans, max capacity hopper is approx. 0.5 kg (and 1 kg for large/optional hopper). B) Open the hopper slide. (2) C) Turn the ON/OFF switch on (3). It will light up and coffee grinder is now ready for operation.
Ask your nearest Anfim service dealer to check the grinding discs for wear & tear and have them replaced after grinding 400-500kg. (Anfim steel discs). c) Ask your nearest Anfim service dealer to check for regular wear & tear and to replace worn parts, in case of need.
7. Servicing 7.1 Instructions for service request All technical interventions must only be performed by authorized personnel of Anfim or one of its authorised servicer dealers. A N F I M Via B. Verro 33/5 - 20141 MILANO Tel. (+39) 02/8465054 Fax.
Need help?
Do you have a question about the BEST ON DEMAND ELECTRONIC and is the answer not in the manual?
Questions and answers