LED Strip Studio LED Ethernet Controller 3 User Manual page 37

ART-NET
DMX OUT universe
Pixel mode
DMX PIXEL MODE
Number of pixels
LEDs per pixel
You can select one universe of incoming Art-Net universes to be sent out as DMX512
signal out of the LEC3 device.
Display current settings of outputs for Art-Net.
•
Out1-Out4 – one of the 4 outputs
•
Is Enabled – indicates, whether output is enabled
•
First Universe – to use all 1024 LEDs you have to combine several universes
from incoming Art-Net signal. This shows, which universe is the first one to be
used.
•
LEDs count – how many LEDs are being used for selected output.
•
Used Universes – list of all used universes by the output.
Number of used pixels for DMX output (1 to 170)
One incoming RGB pixel (3 DMX channels) can be used several times on SPI output.
This number sets, how many LED pixels on SPI output are controlled using 3 incoming
RGB channels (e.g. if you set this to 4, four LEDs will have same color / will work as one
LED pixel).