Sample Lec3 Ethernet/Lss Distributor Configurations - LED Strip Studio LED Ethernet Controller 3 User Manual

SAMPLE LEC3 ETHERNET/LSS DISTRI BUTOR CONFIGURATIONS
This is sample configuration of LSS controllers we recommend according number of LEDs used:
Number of LED pixels
Up to 4096
Up to 8192
Up to 12288
Up to 16384
Up to 20480
Up to 24576
Up to 28672
Up to 32768
Up to 36864
Up to 40960
Up to 45056
Up to 49152
Up to 52248
Of course, sometimes to save a lot of work and cables, it's better to use more LEC3 Ethernets or LSS
Distributors. If you don't know the best configuration for your project, please contact us – we'll try to give you
the best recommendation.
We've tested the system for up to 52000 LED pixels and it was working fine. But if more LEDs are required, we
recommend using more controlling computers to maintain the fluency of animation. Also for installations with
more than 16000 LEDs it's strongly recommended to use Intel i5 and better processor in your computer.
Total meters for 42 LEDs/m
video strip
95
190
285
380
475
570
665
760
855
950
1045
1140
1235
Recommended configuration
1x LEC3
1x LEC3, 1x LSS Distributor
2x LEC3, 1x LSS Distributor
2x LEC3, 2x LSS Distributor
3x LEC3, 2x LSS Distributor
3x LEC3, 3x LSS Distributor
4x LEC3, 3x LSS Distributor
4x LEC3, 4x LSS Distributor
5x LEC3, 4x LSS Distributor
5x LEC3, 5x LSS Distributor
6x LEC3, 5x LSS Distributor
6x LEC3, 6x LSS Distributor
7x LEC3, 6x LSS Distributor