Art-Net/Dmx - LED Strip Studio LED Ethernet Controller 3 User Manual

Speed Serial number of the device.
Repeat If this is on, file is repeated. This setting is also used for DMX SD-card and Art-Net SD-card
mode.

ART-NET/DMX

This section shows settings related to Art-Net and DMX.
ART-NET/DMX
DMX/Art-Net mode
Default DMX addr
Current DMX addr
DMX OUT mode
DMX IN status
Art-Net and DMX settings
You can use LEC3 in Pixel or SD Card mode over Art-Net and DMX. Find more
information about it in ArtNet mode.
Default DMX address in case DIP switch is set to 0.
Displays current DMX address.
Can be DMX Out and DMX Through. See more details in DMX Out.
Indicates whether valid DMX512 signal is connected to LEC3 device.