Levelling - Samsung DV9*N82 series User Manual

Heat pump dryer
Table of Contents

Advertisement

Levelling

Before you install the dryer, make sure you have read Installation requirements on
page 17. Please note that the following instructions are for installation without using a
drain hose. For instructions for using a drain hose, see the next section, Drain hose (if
necessary). For convenience, consider installing the dryer next to your washer.
B
C
Untitled-2 19
1. Gently put the dryer on the desired
A
2. Use a level (A) and check the levelness
3. If the dryer is not level, adjust the
4. Once the dryer is level, make sure the
5. Plug in the dryer.
• The dryer can be levelled using either
• To set the dryer to the same height as
D
• Extend the levelling leg only as much
location.
of the dryer from side to side and front
to back.
levelling leg (B). Turning the leg
counter-clockwise retracts the leg.
Turning the leg clockwise extends the
leg.
dryer stands firmly on the floor.
NOTE
or both of the front and rear legs of the
dryer.
the washer, fully retract (C) the levelling
legs by turning them counter clockwise,
then loosen (D) the legs by turning
them clockwise.
as necessary. Extending the levelling
leg more than necessary can cause the
dryer to vibrate.
English 19
2018-01-16
10:43:53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv8*n62 seriesDv9*n62 series

Table of Contents