Operations
05 Damp Alert
06 Wrinkle Prevent
07 Alarm Off
08 Drum Light
09 Smart Control
10 Start/Pause (Hold
to Start)
11 Power
30
English
Untitled-2 30
This alert is available only with COTTON, MIXED LOAD,
SYNTHETICS and SILENT DRY (DV9*N82**** models only) cycles. If
a load contains mixed fabrics, the Damp Alert indicator ( ) blinks
when the average dryness of the item is 80 % dry. This lets you
take items that you don't want fully dried or that dry quickly out
of the dryer early while letting others continue to dry.
Adds approximately 3 hours of intermittent tumbling at the
end of the selected cycle to reduce wrinkles. To activate, press
Wrinkle Prevent. The wrinkle prevent indicator blinks, and zero
appears on the display.
Press to mute/unmute the alarm. The sound setting is retained
when you turn the dryer off and turn it on again.
Press to turn on or off the interior lamp. The lamp stays
lit for 2 minutes after it has turned on, and then turns off
automatically.
After connecting the dryer to your home network using the
SmartThings app, you can control dryer remotely. The Smart
Control indicator blinks. The loader enters waiting mode for
remote commands. For more information, see the SmartThings
section on page 40.
Press and hold to start an operation, or press to stop an
operation temporarily.
Press to turn the dryer on/off. If the dryer turns on for
10 minutes without any button being pressed, the dryer
automatically turns off.
2018-01-16
10:44:03