Check Before Use; Module Or Group Operation - Samsung MCM-A00N User Manual

Check before use

Module or group operation

Module/group operation is to combine multiple units in modules or groups of a single
water pipe system and to operate them depending on the working condition.
Main Sub
Unit 0
Module 1
Group 1
A single module control can control a maximum of 16 DVM CHILLERs (0 ~ 15).
– DVM CHILLER can have a maximum of 8 modules (1 ~ 8) and 4 groups (1 ~4).
– A maximum of 8 units can be connected to a module, and a maximum of 8 modules
can be connected to a group.
Depending on the working condition below, set modules or groups.
– A module or a group must be connected to a single water pipe.
– When modules are controlled by a group, the modules cannot operate themselves and
the display will not show the modules during the module operation.
You can select an operation mode, a pattern operation (according to distribution method
of compressor capacity) and an applied operation by each module or group.
Main Sub
Module 2
Group 2
Module control
Main Sub Main
Module 3 Module 4
F3, F4
Sub
Unit 7
English 19