Laser Safety - Ricoh AFICIO MP01 Operating Instructions Manual

INTRODUCTION
This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility
from this machine, all operators should carefully read and follow the instructions in this manual. Please keep this manual
in a handy place near the machine.
Please read the Safety Information in the Printer Reference before using this machine. It contains Important Information
related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
As an Energy Star Partner, we have determined that this printer model meets Energy Star Guidelines
for energy efficiency.
For good print quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that may result from the use of parts other than genuine Ricoh
parts in your Ricoh office product.
Note:
Some illustrations may be slightly different from your machine.
Note:
Certain options may not be available in some countries. For details, please contact your local dealer.
Important
Parts of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of
handling or operating the machine.
Trademarks
Microsoft , Windows , and MS-DOS are registered trademarks of Microsoft Corporation in the United States and/or other
countries.PostScript is registered trademark of Adobe System Incorporated.
Other product names used herein are for identification purposes only and might be trademarks of their respective
companies. We disclaim any and all rights in those marks.
Operator Safety:
This machine is considered a CDRH Class 1 laser device, safe for office/EDP use. The machine contains a 5-milliwat, 760
to 800 nanometer wavelength, GaAlAs laser diode. Direct (or indirect reflected) eye contact with the laser beam may
cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible
laser beam exposure to the operator.

Laser Safety:

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optional units in the field. The
optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem
is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer
engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when
replacement of the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual may result in
hazardous radiation exposure.
The following label is attached on the machine.
This label can be found when opening the By-pass Tray.
Class 1 LASER PRODUCT
IN ACCORDANCE WITH IEC 825
LASER KLASSE 1 nach IEC 825