Ricoh 3590DNP Operating Instructions Manual page 31

17.
Error indicator (Red)
• On: An error has occurred. You can
not make a master.
• Off: Normal status
18.
Speed setting keys
Press to adjust the printing speed. See
p.57 "Changing the Printing Speed".
19. {Initial position} key
Press to reset to the standard image posi-
tion.
20.
Number keys
Press to enter the desired number of
prints and data for selected modes.
21. {Clear/Stop} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress.
22. {Proof} key
Press to make a proof print.
Note
❒ Same as 15.
23. {Start} key
Press to start making masters or printing.
24.
Operation switch
Press this switch to operate the machine
in Energy Saver mode.
To go back into the Energy Saver mode,
press this switch.
19