Ricoh GX200 VF KIT User Manual page 242

Problem
The level indicator is not
displayed.
The image is tilted even
though it was shot with
the level indicator in the
middle or while the level
sound was sounding.
Playback/Deleting
Problem
Cannot play back, or the
playback screen does not
appear.
The contents of the SD
memory card cannot be
played back, or the
playback screen does not
appear.
7
240
Cause
[Level Setting] is set to [Off] or
[Sound].
The display is set to a setting
other than normal symbol display
or histogram.
The camera is upside down
(shutter release button is on the
bottom).
You shot the image while moving,
such as on a amusement ride.
The subject is not level.
Cause
The camera is not in playback
mode.
The VIDEO/AV cable is not
connected properly.
The [Video Out Mode] setting is
incorrect.
The playback screen displays in
the LCD viewfinder.
No SD memory card is loaded, or
an SD memory card with no
stored images is loaded.
You played back an SD memory
card that was not formatted with
this device.
You played back an SD memory
card that was not recorded
normally.
The contact surface of the SD
memory card is dirty.
There is something wrong with
the SD memory card.
Solution
Set [Level Setting] to [Display] or
[Disp + Snd].
Press the DISP. button to change
the display to normal symbol
display or histogram.
Hold the camera correctly.
Shoot in an environment that is
not moving.
Check the subject.
Solution
Press the 6 (Playback) button. P.55
Reconnect it properly.
Set it to the correct format.
Set [Playback Screen] to [LCD].
Load a card with stored images.
Load a card that was formatted
and recorded with this device.
Load a normally recorded card.
Wipe with a soft, dry cloth.
Play back images from another
card and if there is nothing wrong
with the card, the camera is okay.
There may be something wrong
with the card, so do not use it.
Refer to
P.202
P.64
-
-
-
Refer to
P.175
P.217
P.207
P.37
P.186
-
-
-