Ricoh GX200 VF KIT User Manual page 192

4
Press the MENU/OK button.
When [WIDE[DW-6]] or [TELE[TC-
1]] is selected:
• When the power is turned on with a
conversion lens attached, or when a
conversion lens is attached, a symbol
indicating the conversion lens type is
displayed momentarily at the center of
the picture display, and then a smaller
symbol is displayed at the lower right
of the picture display.
When [Start Sel.] is selected:
• When the power is turned on with a
conversion lens attached, or when a
conversion lens is attached, the
conversion lens type selection screen
will display. Press the !" buttons to
select the desired setting and then
press the MENU/OK button. A symbol
indicating the conversion lens type is
displayed momentarily at the center of
the picture display, and then a smaller symbol is displayed at the lower
right of the picture display.
5
Caution------------------------------------------------------------------------------------------
• When [Conversion Lens] is set to [TELE[TC-1]], even if the wide conversion lens (DW-
6) is attached, the camera will recognize the attached lens as the tele conversion lens
(TC-1). In addition, the opposite will be the same.
• When a lens with a different [Conversion Lens] setting is attached, shooting functions
will not operate properly.
190
Conversion Conversion
Lens Select Lens Select
WIDE [ DW-6 ]
TELE [ TC-1 ]
Ok Ok