Ricoh GX200 VF KIT User Manual page 240

Problem
Although the camera is
set to auto focus, it is
unable to focus.
Although the camera is
not in focus, the green
frame appears in the
center of the picture
display.
The picture is blurred.
(The J symbol
appears.)
Vignetting (condition
where the four corners
appear dark) occurs
around the edges.
The flash does not fire or
the flash cannot charge.
7
238
Cause
The lens is dirty.
The subject is not in the center of
the shooting range.
It is a hard-to-focus subject.
The camera incorrectly focused
because the distance to the
subject is too close.
You moved the camera when
pressing the shutter release
button.
When shooting in a dark place
(such as indoors), the shutter
speed slows down and pictures
become easily blurred.
Even with the tele conversion
lens attached, the zoom position
is not set to the telephoto side.
The flash is not open.
The flash cover is not fully raised. Do not press or cover the flash
The flash cannot be used in the
following cases:
• When auto bracket, white
balance bracket, or color
bracket is set
• In multi-shot mode
• When [Movie] or [Landscape]
is set in scene mode
The flash is set to flash off.
Battery is exhausted.
Solution
Wipe clean with a soft, dry cloth. -
Shoot with focus lock.
Shoot with focus lock or manual
focus.
Shoot with macro mode or move
a little away from the subject.
Hold the camera with your elbows
pressed against your body. Use a
tripod.
Use the camera shake correction
function.
Use the flash.
Use the camera shake correction
function.
Raise the ISO setting.
Operate the zoom lever to set the
zoom position to the telephoto
side.
Slide the F (Flash) OPEN switch
outward to open the flash.
cover. Also, return the LCD
viewfinder to the original angle,
and adjust to open the flash.
To shoot with the flash, change
the settings or mode.
Open the flash. Use the F (Flash)
button to cancel flash off.
When using the dedicated
rechargeable battery or AAA
nickel-metal hydride batteries,
charge the batteries as required.
When using AAA alkaline
batteries or AAA oxyride
batteries, replace them with new
batteries. Use the AC adapter as
required.
Refer to
P.45
P.45
P.109
P.49
P.43
P.137
P.51
P.137
P.146
-
P.51
P.51
P.51
P.127
P.128
P.130
P.112
P.94
P.151
P.51
P.36
P.32
P.250