Wall Mounting - HIKVISION DS-2CE71D0T-PIRL User Manual

2.4 Wall Mounting

Before you start:
You need to purchase a wall mount separately.
Steps:
1. Drill four screw holes in the wall according to the
holes of the mount.
2. Install the mount to the wall by aligning the four screw
holes of the bracket with expansion screws on the
wall.
3. Secure the mount with four hex nuts and washers.
4. Install the mounting base of the turret camera to the
wall mount, and secure them with supplied screws.
Figure 2-14 Install the Mounting Base to the Bracket
5. Route the cables through the mount.
6. Repeat steps 6 to 8 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
Figure 2-13 Install the Bracket
Wall Mount