Ricoh Type 2018 Printer Reference page 18

Troubleshooting
❖ ❖ ❖ ❖ Alert messages
Messages/Second messages
Add toner
Out of toner. Follow
instructions inside and
replace toner
2
Change Tray # to the follow-
ing settings:
xxx yyy
Connect failed: IEEE802.11b
Turn power off, check card
Collate cancelled.
Collate: Page max
Cover open
Cover is open as shown.
Close it.
Duplex cancelled.
12
Causes
Toner is running out.
The settings of the selected pa-
per tray are different from
those specified for printing.
# indicates the tray number.
xxx indicates the tray number.
yyy indicates the paper size.
The IEEE 802.11b card may
have come off, or an error may
have occurred in the IEEE
802.11b card.
The collate print function has
been canceled.
The maximum number of pag-
es has been exceeded for colla-
tion.
The cover indicated on the dis-
play is open.
Duplex printing has been can-
celed.
Solutions
It is time to supply toner.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to print regardless.
For details about the paper
tray settings, see General Set-
tings Guide.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed. Or, increase mem-
ory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Close the cover.
Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.