Table of Contents
Advertisement
Installation
Installation Requirements
Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Ambient Dust:
Avoid areas exposed to sudden temperature changes:
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2")
Do not place the machine where it may be subject to strong vibrations.
Machine level
Power Requirements
Line voltage level:
D052/D053/D054:
Permissible voltage fluctuation: +/-10%
Never set anything on the power cord.
Ver. 1.5
Product Support Guide
10° C to 32° C (50° F to 89.6° F)
15% to 80% RH
Less than 1,500 lux (do not expose to direct sunlight)
3 times/hr/person
Less than 0.075 mg/m
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
•
Front to back: within 5mm (0.2") of level
•
Right to left: within 5mm (0.2") of level
120V 60 Hz 20A
Page 11 of 41
Subject to change without notice
D052 / D053 / D054
3
3
(2.0 x 10-6oz/yd
)
12/12/2008
Advertisement
Table of Contents
