Installation; Location; Mounting Space - Omron SYSDRIVE 3G3IV Installation Instructions Manual

3G3IV-A2004-EV1
Inverter
Specifications
A: Enclosed wall-
mounting
B: Panel-mounting
P: Option
Voltage
2: 200 V
4: 400 V
1-4

Installation

Caution Never move, lift or handle the SYSDRIVE 3G3IV cabinet by front cover or
1-4-1

Location

Caution To house multiple SYSDRIVE 3G3IVs in a switchgear, install a cooling fan or
1-4-2

Mounting Space

1.18 in (30 mm)*
OR MORE
(a) Front View
Fig. 1 Mounting Spaces
Applicable maximum
motor output
004: 0.4 kW
007: 0.75 kW
to
30K: 300 kW
terminal stands. Lift the cabinet from the bottom.
Location of the equipment is important to achieve proper performance and
normal operating life. The SYSDRIVE 3G3IV units should be installed in ar-
eas where the following conditions exist.
• Ambient temperature:
• Protected from rain or moisture.
• Protected from direct sunlight.
• Protected from corrosive gases or liquids.
• Free from airborne dust or metallic particles.
• Free from vibration.
• Free from magnetic noise.
some other means to cool the air entering the inverter below 45°C (113°F).
Install SYSDRIVE 3G3IV vertically and allow sufficient space for effective
cooling as shown below in Fig. 1.
1.18 in (30 mm)
OR MORE
5.9 In (150 mm)
OR MORE
ALLOWABLE
TEMPERATURE
OF CONTROL PART:
55°C(131°F)**
FRONT
COVER
5.9 in (150 mm)
OR MORE
V2: Version capable of communicating
with PC (optional card required)
E: European specifications
blank: Japaneae specifications
--10° to 40°C, 14° to 104°F (For enclosed type),
--10° to 45°C, 14° to 113°F (For open chassis type)
AIR
(b) Side View
OPEN CHASSIS TYPE: 45°C(113°F)
ENCLOSED WALL-MOUNTED TYPE: 40°C(104°F)
AIR
* 3.9in (100 mm) for models 3G3IV-B4110-E or B4150-E
3.15in (80 mm) for models 3G3IV-B4180-E or B4220-E
** Allowable temperature up to 50°C(122°F)
when front cover is removed.
Section 1-4