Ricoh Aficio 1060 General Settings Manual page 49

Mode Network
Environment
Scanner Wireless
*4
(Network LAN
Delivery
Scanner)
Printer TCP/IP
NetWare
IEEE 1394
Wireless
*4
LAN
*1
Make necessary settings for your network environment. For details about settings,
see the Network Printing Guide.
*2
Configure TCP/IP when you use pure IP of NetWare 5/5.1.
*3
You will need the IEEE 1394 Interface Board (option).
*4
You will need the IEEE 802.11b Interface kit (option).
*5
Make necessary settings when the communication mode is Ad hoc Mode.
*6
Make necessary settings when the communication mode is 802.11 Ad hoc Mode.
Note
❒ In a network environment using TCP/IP, you can use SmartNetMonitor to
configure IP addresses for Admin and the web browser packaged with Print-
er Controller or Printer/Scanner Controller. For details about Smart Net
Monitor, see the Network Printing Guide.
❒ For details on setting values, see p.75 "Settings You Can Change with User
Tools".
Network Settings
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select, Communication
Mode, Channel
*6
, Delivery Option
*1
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select
*1 *2
Effective Protocol, NW Frame
Type
*3
IP Address, Subnet Mask,
Gateway Address, Effective
Protocol (TCP/IP), IP over 1394
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select, Communication
Mode, Channel
*6
Reference
⇒ p.37 "When using TCP/IP",
p.41 "When using the Wireless
LAN Interface (option) in Ad
hoc Mode", p.42 "When using
*5
, WEP, SSID the Wireless LAN Interface
(option) in Infrastructure
Mode"
⇒ p.37 "When using TCP/IP",
p.38 "Acquiring the IP Ad-
dress from the DHCP Server"
⇒ p.38 "When using Net-
Ware"
⇒ p.37 "When using TCP/IP",
p.39 "When using the IEEE
1394 Interface (option)"
⇒ p.37 "When using TCP/IP",
p.41 "When using the Wireless
LAN Interface (option) in Ad
hoc Mode", p.40 "When using
*5
, WEP, SSID the Wireless LAN Interface
(option) in 802.11 Ad hoc
Mode", p.42 "When using the
Wireless LAN Interface (op-
tion) in Infrastructure Mode"
Configuring the Network
2
35