Microprocessor Control; Wireless Remote Controller - Mitsubishi Electric MSZ-AP15VF-E1 Service Manual

9

MICROPROCESSOR CONTROL

MSZ-AP15VF MSZ-AP20VF

WIRELESS REMOTE CONTROLLER

Battery replacement indicator
Operation display section
TEMPERATURE buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indication.
Indication
The unit is operating to
reach the set temperature
The room temperature is
approaching the set tem-
perature
Standby mode
(Only during multi system
operation)
OBH799
Signal transmitting section
Distance of signal :
About 6 m
Beep(s) is (are) heard
from the indoor unit
when the signal is received
OPERATION SELECT button
ECONO COOL button
STOP/OPERATE
(OFF/ON) button
Indication of
remote controller
model is on back
Operation state Room temperature
About 2°C or more away
from set temperature
About 1 to 2°C from set
temperature
i save button
-
11
FAN SPEED CONTROL button
VANE CONTROL button
TIME, TIMER set buttons
FORWARD button
BACKWARD button
WEEKLY TIMER
set button
RESET button
CLOCK SET button
Lit
Blinking
Not lit