Cashinotech KP628C Manual page 4

KP628C Kiosk thermal printer control board user manual
Dot pitch(vertical)
Effective printing area
Number of columns
Paper width
Paper thickness
interface
For Print head
For motor
Power supply
For cutter motor
For logic
For module
Dimensions(W×D×H) Module
Weight Module
Head
Life
Cutter
Operating Temp
Operating Humidity
Environment
Storage Temp
Storage Humidity
Head Temp
Head temp detection
Detection function
Head-up detection
Out-off paper detection Via photo interrupter
4. Control Board Introduction
It sends data to the control board via serial port or USB port. And control board drive printer head to
print.
4.1 Self-test print
Power on ,Press K1 key in the bottom board,the printer can print a self-test paper.
0.125 mm（8dots/mm）--line feed pitch
48 mm
ANK 32 columns/line（maximum12x24dot font）
57.5±0.5mm
60 to 85 μ m (some paper in this range may not be used because
of paper characteristics)
RS232+TTL+USB
4.2-8.5VDC ,average current1.8A(at 5V)
2.6A(at7.2V),2.8A(at8.0V)
4.2 - 8.5 VDC. Maximum 0.46A
5-9 VDC，Maximum 1A
2.7 - 5.25 VDC, Maximum 0.01A
5V-8.5VDC, Maximum 5A Rated voltage:7V.
86.5W x 52.0 D x36.0 H mm (without control board)
0.25KG
100 million pulses or more(print ratio=12.5%)
50 km or more
1,000,000 times
0° C to 50° C
20 to 85% relative humidity
-25° C to 70° C
5 to 95% relative humidity
Via thermistor
Via photo interrupter
4 Page of 38
CASHINO TECH