Cashinotech KP628C Manual page 31

KP628C Kiosk thermal printer control board user manual
Parameter (A) 0 ≤ m ≤ 6
range (B) 65 ≤ m ≤ 74
Default No
Support types All
Printer does not execute barcode printing if the width is exceeding the printed
area.
The command feeds paper to execute and has no effected with ESC 2 ,ESC3 line
space or has no effects with line space.
The command is not effected with ESC ! Character type.
After executing the command,printing position will recover to initial printing
position.
m when parameter is 0 ~ 6(A)and 65 ~ 71(B)choose same code system,the
printing effects are the same.
m when parameter is 0 ~ 6(A)，barcode data is end up with NULL.
m when parameter is 65 ~ 74(B)，barcode data means data length.
k is for signal,not for transmitting.
When print UPCA（m = 0 or 65）,pls note:
No matter input data is 11 or 12,parity bit will insert or error correction
automatically.
Initial characters,central separating character,ending characters insert
automatically.
When print UPCE（m = 1 or 66）,pls note:
When data length is 6,system characters (NSC)0 insert automatically.
Notes When data length is 7、8、11and 12，the first bit system character (NSC)d1
has to be 0.
No matter input data length is 6 、 7 、 8 、 11 and 12 ， parity bit will insert
automatically or error correction.
No matter input data length is 6、7、8、11 or 12，barcode HRI only shows
6 as data,not including system characters(NSC) and parity code.
Transmit data and printing data transformational relation as below:
When d6 is 1-9,it should make sure d7,d8,d9,d10 is 0，d11 is 5~9
Initial characters,ending characters insert automatically
31 Page of 38
CASHINO TECH