KP628C Kiosk thermal printer control board user manual
When n is 0,it cancels user customize character sets.
When n is 1,it cancels user customize character sets.
Parameter
0 ≤ n ≤ 255
range
Default
0
Support types
All
When cancel user customize character sets,it chooses internal character sets
Notes
automatically.
Example
No
Define user cutomize character sets
Name
Define user customize character sets
ASCII
Code
DEC
HEX :1B 26 y c1 c2 [x1 d1...d(y x1)]...[xk d1...d(yxk)]
Define user customize characters。
y assigns vertical direction bytes.
Function
c1 assigns initial character code,c2 assigns ending character code
xk assigns horizontal direction dots.
x y rang is correspond with internal fonts.
If choosing 6*12 font,y = 2, 0 ≤ x ≤ 6
Parameter
If choosing 12*24 font,y= 3, 0 ≤ x ≤ 12
range
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ d1 ... d(y*xk) ≤255
Default
No
Support types
All
Definable character code range:from<20>H to <7E>H ASCII code(95
characters)。
It can define continuous character encoding for several characters.When it
need one character,make c1=c2.
d
direction.It is blank for the rest dots in the right side.
Defined user defines characters data is (y*x) byte.
Set corresponding bit of printing dots is 1 or corresponding bit of no
Notes
printing dots is 0.
The command can define every font to different self-defined character
modes.Use ESC! to set fonts.
User can not define characters or download bitmap at the same
time.Downloading bitmap will be eliminated.
User defined characters will be eliminated as below situations:
:ESC & y c1 c2 [x1 d1 ... d (yx1)] ... [xk d1 ... d(y x k)]
:27 38 y c1 c2 [x1 d1 ... d(yx1)] ...[xk d1 ... d(yxk)]
is character's dot data,dot mode starts from left side in the horizontal
Execute ESC @。
Execute GS *。
Execute ESC ?。
17
Page of 38
CASHINO TECH