Cashinotech KP628C Manual page 27

KP628C Kiosk thermal printer control board user manual
Parameter No
range
Default No
Support types All
Tabulation position is setted ESC D
If tabulation position is not setted(it defaults no horizontal tabulation
Notes position),the command is as LF command
If tabulation position is exceeding printing area,the coordinate will move to
initial position of next line(the data of that line is fill,print and change a line.)
Example No
Set horizontal tabulation position
Name Set horizontal tabulation position
ASCII
Code DEC
HEX ：1B 44 [d]k 00
Set horizontal tabulation position,parameter meanings as below:
Function d1 ... dk：horizontal tabulation position,is for the unit of 8 dots,NULL is the end
mark.
Parameter XX58：1 ≤ d ≤ 46（d1 <d2 < ...... dk ，1 ≤ k ≤ 16）
range XX80：1 ≤ d ≤ 70（d1 < d2 < ...... dk ，1 ≤ k ≤ 16）
Default [d]k = 0（it defaults no horizontal tabulation position）
Support types All
Tabulation position as below:
Notes
Max support 16 pcs of tabulation setting
Use the command to cancel the setted tabulation
k is for signal,not for transmitting
Transmit [d]k to meet NULL,it is end.
If dk ≤dk-1，it is end,the rest data is as normal data to handle.
Tabulation position can shifted by HT.
When changing left margin,tabulation position can be changed at the same time.
When ESC@,printer resets,power off,the command setting is disabled.
Example No
：ESC D [d]k NUL
：27 68 [d]k 0
27 Page of 38
CASHINO TECH