NETGEAR M4300 User Manual page 168

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable Stack Configuration fields.
Table 58. Stack Configuration
Field
Hardware Management
Preference
Standby Status
Switch Status
The following table describes the nonconfigurable Stack Status information that is displayed.
Table 59. Stack Status nonconfigurable fields
Field
Hardware Management
Preference
Standby Status
Description
The hardware management preference of the switch. The hardware
management preference can be disabled or unassigned.
Identifies the switch that is configured as the standby unit. The possible
values are as follows:
Cfg Standby. Indicates that the unit is configured as the standby unit.
•
The unit configured as the standby switch becomes the stack manager if
the current manager fails.
Opr Standby. Indicates that this unit is operating as the standby unit
•
and the configured standby unit is not part of the stack.
None. The switch is not configured as the standby unit.
•
The status of the selected unit. The possible values are as follows:
OK. The unit is connected and works properly.
•
Unsupported. The type of inserted unit is not supported.
•
Code Mismatch. The firmware version is not identical to the master or
•
management unit.
Config Mismatch. The inserted device type is different from the
•
configured devices.
Not Present. The unit is not connected.
•
SDM Mismatch. The SDM template does not match.
•
Updating Code. A firmware update is in progress.
•
STM Mismatch. The STM template does not match.
•
Description
The hardware management preference of the switch, which can be
disabled or unassigned.
Identifies the switch that is configured as the standby unit:
Cfg Standby. The unit is configured as the standby unit. The unit
•
configured as the standby switch becomes the stack manager if
the current manager fails.
Opr Standby. This unit is operating as the standby unit and the
•
configured standby Unit is not part of the stack.
None. The switch is not configured as the standby unit.
•
Stacking
168