Using The Usb Socket; Led Flashlight; Proper Disposal - Wagan iOnBoost V6 User Manual

USING THE USB SOCKET

1. Connect the USB device to the iOnBoost with either a user-supplied cable or the included
4-in-1 USB adapter.
2. Click the power button on the iOnBoost.
3. When your mobile device is fully charged, disconnect your device from the iOnBoost.
4. If the charge in the iOnBoost is low, the USB port will shut off to prevent damage to the
iOnBoost. Recharge the iOnBoost as soon as convenient.

LED FLASHLIGHT

The light will automatically shut off before the iOnBoost runs out of power.
1. Hold down the power button until the indicator lights turn on (~3 seconds).
2. Press once to switch lighting modes: steady – flashing – SOS morse code – off.
3. Recharge battery as soon as convenient.

PROPER DISPOSAL

• This product has no consumer serviceable parts.
• Do not attempt to remove or replace the battery used in this device. When
the battery has reached the end of its lifetime, please take the entire unit to a battery
recycling facility.
User's Manual—Read before using this equipment
11