Related Manuals for Wagan 2509
Summary of Contents for Wagan 2509
- Page 1 Item No. : 2509 600 Amp Battery Jumper ™ User’s Manual We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
-
Page 2: General Warnings
600 Amp Battery Jumper by Wagan Tech ™ ® Thank you for purchasing the 600 Amp Battery Jumper by Wagan Tech . With normal care and ™ ® proper treatment, it will provide years of reliable service. IMPORTANT INFORMATION • Please read and understand all warnings, cautions, and notes included in this manual... -
Page 3: Product Features
Charging Time (DC—with engine running) 12 hours Dimensions WxLxH (inches) 10.3 x 6.9 x 11.0 Weight (lb) 13.0 12V, 500mA DC AC Charging Adapter Output ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. -
Page 4: Front View
600 Amp Battery Jumper by Wagan Tech ™ ® FRONT VIEW 1. LED Worklight 7. DC Socket 2. Worklight Switch 8. USB Power Ports 3. USB Power Indicator 9. Battery Status Indicators 4. Charging Indicator 10. Battery Status Button 5. Polarity Indicator 6. -
Page 5: Rear View
11. Air Compressor Switch 12. Air Vent 13. Jumper Cable (negative) 14. Air Hose 15. Pressure Gauge 16. Jumper Safety Switch 17. Jumper Cable (positive) ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. -
Page 6: Battery Status
600 Amp Battery Jumper by Wagan Tech ™ ® BATTERY STATUS The color LED indicators on the front of the unit provide the current state of charge on the internal battery. It is the user’s responsibility to periodically monitor the battery’s status and recharge every 3 months in addition to recharging after each use. - Page 7 3. Turn off the vehicle ignition and accessories (e.g. radios, lights, air conditioners), and disconnect all devices such as GPS and mobile phones or tablets. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
-
Page 8: Air Compressor
600 Amp Battery Jumper by Wagan Tech ™ ® 4. Turn off all Battery Jumper switches and disconnect all accessories. 5. Determine the polarity of the vehicle’s battery terminals. The positive (POS, P, +) battery terminal is usually larger in diameter than the negative (NEG, N, −) terminal. If you are unsure, you should refer to the vehicle owner’s manual. -
Page 9: Dc Output Socket
5. After use, disconnect the accessory plug from the DC socket. 6. Replace the dust cover. 7. Recharge the Battery Jumper as soon as convenient. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. -
Page 10: Usb Power Port
600 Amp Battery Jumper by Wagan Tech ™ ® USB POWER PORT You may operate the USB port, worklight, and DC socket at the same time. 1. Open the dust cover. 2. Connect a user-supplied USB cable to either of the USB power ports on the Battery Jumper. - Page 11 Product is warranted to the original purchaser for a period of one (1) year from the original purchase date, to be free of defects in material and workmanship. WAGAN Corporation disclaims any liability for consequential damages. In no event will WAGAN Corporation be responsible for any amount of damages beyond the amount paid for the product at retail.
- Page 12 31088 San Clemente Street Hayward, CA 94544, U.S.A. Tel: +1.510.471.9221 U.S. & Canada Toll Free: +1.800.231.5806 customerservice@wagan.com www.wagan.com ©2015 Wagan Corporation. All Rights Reserved Wagan Tech and wagan.com are trademarks used by Wagan Corporation REV20151217-E...