Page 1
Item No. : 7505 LITHIUM JUMP STARTER User’s Manual We are constantly improving our products so specifications are subject to change without notice.
User’s Manual—Read before using this equipment Thank you for purchasing the iOnBoost V8 Torque by Wagan Tech . With normal care and ™ ® proper treatment, it will provide years of reliable service. IMPORTANT INFORMATION • Before using this unit, read and understand all instructions included in this manual as well as those published by your vehicle’s battery manufacturer or any other device intended to...
User’s Manual—Read before using this equipment PRODUCT DIAGRAM Actual contents may differ slightly from that pictured. 1. Power button Jumper terminal 2. USB-C charging jack 8. Storage case 3. Battery status indicator 9. Jumper cables 4. 5V, 2A USB port 10.
V8 Torque by Wagan Tech ™ ® CHARGING THE IONBOOST This product may arrive partially charged from the manufacturer� It is recommended to fully charge the unit immediately after purchase and before using for the first time� Prior to charging the unit, read and understand all instructions in this manual�...
Page 7
User’s Manual—Read before using this equipment • If the iOnBoost is overloaded while in the jumpstart mode, quickly disconnect the negative then positive clamps. All functions on the iOnBoost will not operate if the unit was overloaded. To recover from overload, let the unit rest for 10 minutes then plug it into a power source for a few minutes to reset the unit.
Page 8
V8 Torque by Wagan Tech ™ ® Brief Recap of Sequences for Connection and Disconnection ORDER OF CONNECTION 1. Connect cables to iOnBoost. 2. Connect positive (red) 3. Connect negative (black) clamp to positive battery clamp to solid metal ground terminal.
User’s Manual—Read before using this equipment TROUBLESHOOTING Jumpstart Warning Lights The iOnBoost is ready to jumpstart when the cables are connected and a steady green light illuminates on the cable safety block. The following chart displays the combinations of warning lights that occur when the iOnBoost fails to display the ready light: Warning lights Type of warning...
• Do not attempt to remove or replace the battery used in this device. When the battery has reached the end of its lifetime, please take the entire unit to a battery recycling facility. Looking for dependable battery chargers & jump starters? Rely on Wagan for quality and long-lasting products.