Advertisement
RHEEM-RUUD COMMERCIAL
ELECTRIC TANK-TYPE WATER HEATERS
SAMPLE SPECIFICATIONS (for trade reference only)
Water heater(s) shall be Rheemglas Commercial Electric Model ________________, having an input of
__________ KW and a recovery rate of _____________ GPH at a _______°F temperature rise, and equipped for
________volt, ________phase operation. Tank shall be lined with a double coating of exclusive Rheemglas high
temperature glass formula and furnished with rigidly supported anode rods. Tank shall be designed for 150 PSI
working pressure. Tank shall be completely insulated with R-Foam
®
insulation having a minimum insulating factor
of R-16. Water heater shall be equipped with immersion "screw-in" elements, immersion thermostat, magnetic
contactors, and manual reset high temperature limit control. Large terminal block that accepts either CU or AL
field connect wire, plus grounding screw for attaching an equipment grounding conductor. Water heater shall
include a factory installed System Sentinel element diagnostic panel utilizing light emitting diodes. Each L.E.D.
will correspond to the number and location of the heating element and monitor their on-off function.
Optional: Thermostats for staging input into maximum element step that will not exceed 18 KW per step.
(See table for number of thermostats available.
THREE YEAR LIMITED WARRANTY
This product features a three year limited warranty against tank leaks. Please refer to Commercial
Warranty Information brochure for complete warranty information.
C O M M E R C I A L
W A T E R
H E A T E R S
In keeping with its policy of continuous progress and product improvement, Rheem-Ruud reserves the right to make changes without notice.
Rheem Canada Ltd./Ltée • 128 Barton Street West, Hamilton, Ontario L8N 3P3
P R I N T E D I N U. S . A
0 4 / 0 6 W P
F O R M N O. R R 1 0 2 C E - 1 C A N R e v. 3
Advertisement
