Downloaded from
www.Manualslib.com
Split the screen
The Plot-Detail view can give you two simultaneous views of
the plot.
1. Press
graph is plotted twice. You can now zoom in on the right
side.
2. Press
or
of split screen with Zoom In.
.
–
–
–
3. To un-split the screen, press
over the whole screen.
The Plot-Table view gives you two simultaneous views of the
plot.
1. Press
screen displays the plot on the left side and a table of
numbers on the right side.
2. To move up and down
the table, use the
keys move the trace point left or right along the plot, and
in the table, the corresponding values are highlighted.
3. To move between functions, use the
keys to move the cursor from one graph to another.
4. To return to a full Numeric (or Plot) view, press
(or
2-14
manuals search engine
. Select Plot-Detail and press
, select the zoom method and press
H@IVÃaPPH
. This zooms the right side. Here is an example
The Plot menu keys are available as for the full plot
(for tracing, coordinate display, equation display, and
so on).
moves the leftmost cursor to the screen's
left edge and
moves the rightmost cursor
to the screen's right edge.
The
menu key copies the right plot to the left
plot.
. The left side takes
. Select Plot-Table and press
and
cursor keys. These
).
. The
PF
PF
. The
PF
and
cursor
Aplets and their views