HP 40G User Manual page 202

Downloaded from www.Manualslib.com
To draw a box
1. In Sketch view, press
where you want any corner of the box to be.
2. Press
3. Move the cursor to mark the opposite corner for the box.
You can adjust the size of the box by moving the cursor.
4. Press
To draw a circle
1. In Sketch view, press
where you want the center of the circle to be.
2. Press
3. Move the cursor the distance of the radius.
4. Press
DRAW keys
Key
9PU•
9PU•
GDI@•
7PY•
8DS8G•
14-4
manuals search engine
and move the cursor to
9S6X•
. This turns on box-drawing.
7PY•
to finish the box.
PF•
and move the cursor to
9S6X•
. This turns on circle drawing.
8DS8G•
to draw the circle.
PF•
Meaning
Dot on. Turns pixels on as the cursor
moves.
Dot off. Turns pixels off as the cursor
moves.
Draws a line from the cursor's starting
position to the cursor's current position.
Press when you have finished. You
PF•
can draw a line at any angle by moving the
cursor.
Draws a box from the cursor's starting
position to the point at which you press
.
PF•
Draws a circle with the cursor's starting
position as the center. The radius is the
distance between the cursor's starting and
ending position. Press to draw the
PF•
circle.
Notes and sketches