❏ Resetting the unit (this resets the unit settings to the default)
If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem.
If the unit is reset, your settings are restored to the default values. Be sure to note down your setting contents before performing the following operations.
• This operation is not possible if "Control" and "Standby Through" are set to other than "OFF".
1. In standby mode, while pressing and holding LISTENING MODE of the main unit, press
2. When "RESET?" appears on the display, press MULTI ZONE ON/OFF.
3. When "OK?" appears on the display, press MULTI ZONE CONTROL.
Need help?
Do you have a question about the TX-SR383 and is the answer not in the manual?
Questions and answers