Menu operations
Contents
Preparation
≫
Use the OSD (On-Screen Display) that appears on the TV to make the settings.
• When you do not use an HDMI cable but use an analog video cable to connect
with the TV, the operation screens cannot be displayed on the TV. In such a
case, see the display of the main unit to make the settings.
• When the input is set to "USB", or headphones are connected to the PHONE
jack of the main unit, the Setup menu cannot be operated.
Press
on the remote controller to display the Setup menu.
Select the item with the cursors
to confirm your selection.
Use the cursors
/
• To return to the previous screen, press
• To exit the settings, press
60
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫
Setu p
1 .AccuEQ Room Cal.
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
6.Power Management
/
of the remote controller, and press ENTER
to change the default values.
.
.
Setup
≫
≫