Table of Contents
Advertisement
Quick Menu
Menu operations
Contents
Preparation
≫
While checking the display of this unit, you can adjust the settings you frequently
use.
1. Press the Q button on the remote controller.
2. Select the item with the cursors
setting with
/ .
• To exit the settings, press the Q button.
• Depending on the input source, setting condition and connection status, some
items may not be selected.
„ EQ (Acoustic Calibration EQ)
You can choose whether to enable or disable the frequency characteristic
correction by the measurement result of "Automatic Speaker Setting (AccuEQ
Room Calibration)". (
• It cannot be set when the listening mode is Direct or headphones are used.
„ AV. SYN (A/V SYNC)
If the video is behind the audio, you can delay the audio to offset the gap.
• It cannot be set when the listening mode is Direct with analog signal input.
„ M.OPT (Advanced Music Optimizer)
Improves the quality of the compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The setting can be set for each
input.
• This can also be set with the M.OPT button of the remote control.
• It cannot be set if the listening mode is Direct.
„ DUAL MONO
Set the audio channel or language to be output when playing multiplex audio or
multilingual broadcasts, etc.
"CH1": Main channel only
"CH2": Sub channel only
66
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫
/
of the remote controller, change the
p34)
Setup
≫
≫
Hide quick links:
Advertisement
Chapters
Table of Contents
