User's Guide ______________________________________________________________________
Communication Setting Commands
NOTE
78 __________________________________________________________________ M211840EN-C
In this section, the commands to be typed by the user are presented in
normal text while the responses of the transmitter are presented in
italic.
Checking Current Communication
Settings (aXU)
Use this command to request the current communication settings.
Command format in ASCII and NMEA 0183: aXU<cr><lf>
Command format in SDI-12: aXXU!
where
a
=
XU
=
XXU
=
<cr><lf>
=
!
=
Example response in ASCII and NMEA 0183:
aXU,A=a,M=[M],T=[T],C=[C],I=[I],B=[B],D=[D],P=[P],S=[S],
L=[L],N=[N],V=[V]<cr><lf>
Example response in SDI-12:
aXXU,A=a,M=[M],T=[T],C=[C],I=[I],B=[B],D=[D],P=[P],S=[S],
L=[L],N=[N],V=[V]<cr><lf>
Device address, which can consist of the following
characters: 0 (default) ... 9, A ... Z, a ... z.
Device settings command in ASCII and NMEA 0183
Device settings command in SDI-12
Command terminator in ASCII and NMEA 0183
Command terminator in SDI-12