Siqura FD1103M1-I Quick Start Manual

FD1103M1-I
3 MP Intelligent IP indoor fixed dome camera with IR

Quick Start Guide

Unpack

Note: Subject to modification. Actual product and accessories may differ in appearance.

Point the lens

Note: For mounting instructions for pole, wall or
ceiling mount, see respective manuals.
Pan
© Siqura B.V. 2017
Version 1.1 (160707-1.1)
fd1103m1i QSG (MW10)
Find additional manuals, the datasheet,
the EU Declaration of Conformity and the
latest firmware for this product at:
http://www.tkhsecurity.com/support-files
RJ-45
802.3af PoE

Use DHCP server

DHCP:
Network s wit ch
Tilt
IP = 10.x.y.z
DHCP
Rotate

Connect

12 Vdc

CVBS, GND : Auxiliary video output

1A, 1B : Alarm Out

D+, D- : RS-485 interface

IN, GND : Alarm In
IP = 10.x.y.z
IP = 10.x.y.z

Insert Micro SD card / Reset

Status
Reset button*
*Reset button: Press and hold for 10 sec. when powering on or rebooting.
Warning: Restores factory default settings, including IP address, user name and password!

Use fixed IP address

DHCP:
Network s wit ch
30 s
IP = 192.168.1.x
2 ~ 253
DHCP
Note: Use Device Manager (see next) to discover the camera on the network.
http://www.tkhsecurity-usa.com
Serial port
(debugging only)
Micro SD/SDHC/SDXC,
(up to 128 GB)
IP = 192.168.1.x
http://www.tkhsecurity.com