Advertisement
3. Precautions
• Attaching the Nozzle
Do not press the Nozzle or pull on the edge of the
Nozzle by pliers. Also, do not retighten the screw too
tightly
• Thermal Protector
Power will automatically be off when the unit exceeds
a certain temperature. Once the temperature has
dropped to a safety level, power will automatically
turn on.
Caution - High Temperature Operation
Do not use the SMD unit near ignitable gases, paper,
or other inflammable materials.
The nozzle air is extremely hot and can cause painful
burns. Never touch the heater pipe or allow the
heated air to blow against your skin.
Do not disassemble the Product.
Disconnect the plug when you don't use the unit for a
long time.
When the power cord is connected into the power
supply, the unit has a little flow of electricity, even the
Power Switch is in off position. So then you don't use
the unit for a long time, disconnect the plug.
www.tmatlantic.com
6
Advertisement
