1. Intoduction The 100BASE-T1 Media Converter easily connects 100BASE-T1 (BroadR-Reach ) and 100BASE-TX (Fast Ethernet) networks. Using the USB interface, it supports reading and writing of the PHY settings of both network links, diagnostic and status information, and firmware update. Power can be supplied via the USB connector (5V) or via the main connector (6V-28V).
5. Configuration If DIP2=OFF then DIP1 determines the 100BASE-T1 role. If DIP2=ON then DIP1 has no effect. The auto role switch feature can increase the link setup time. Do not connect the 100BASE-T1 interfaces of two Media Converters with auto role switch turned on on both sides.
6. Software 6.1 User Interface The graphical user interface is currently being developed. The first release will provide the following functions: 100BASE-T1 connection: * Link Status * Signal Quality Indicator (SQI) * Access to PHY registers 100BASE-TX connection: * Link Status * Access to PHY registers Controller * Firmware Information...
9. Warranty Within the warranty period, we eliminate manufacturing and material defects free of charge. You can reach us during our normal opening times at the following telephone number +49 (0)8166 5 82 91 40 or via e-Mail: support@i-novative.de. page 7...